How to Check a Laptop’s Screen for Dead Pixels, Backlight Bleed and Burn-In
How to Check a Laptop's Screen for
Dead Pixels, Backlight Bleed and Burn-In
The screen is the part you stare at all day and the part that is costliest to fix. Five minutes of tests before you pay will catch almost every display fault.
Clean the screen, set brightness high, and run full-screen white, black, red, green and blue, scanning slowly each time. A dot that stays black on every colour is a dead pixel; a dot stuck on one bright colour is a stuck pixel; a dot that stays white is a hot pixel. Next, show a black screen in a dim room and move your head: haze that shifts is normal IPS glow, a patch that stays put at an edge or corner is backlight bleed. Finally, on any OLED laptop show a 50% grey screen and look for ghost outlines of a taskbar or logo, which signal burn-in if they do not fade. Mild bleed on black in the dark is common; defects in the middle of the screen are not worth buying.
green, blue — test all
IPS glow from bleed
reveals burn-in
722 264WhatsApp — ask us to run
these tests with you
When you buy a used or refurbished laptop, the screen is the one component you cannot easily swap and the one you will look at for years. A scratched case is cosmetic; a dead pixel in the middle of a spreadsheet or a glowing corner on a dark document is something you will notice every single day. Yet most buyers glance at the desktop wallpaper, see a bright picture, and move on.
This guide shows how to test properly. The three faults it covers behave very differently: pixel defects are about individual dots, backlight bleed is about light leaking from the edges of an LCD, and burn-in is about uneven wear. It also explains what the manufacturer will and will not cover, because on an imported or refurbished unit that answer matters before you pay. For the rest of a physical inspection, use our grading checklist.
Step Zero: Prepare the Screen So Tests Are Fair
A dirty or dimmed screen gives false results in both directions.
Test 1: Dead, Stuck and Hot Pixels
Each solid colour hides a different kind of fault. That is why you need all five.
| Type | What it looks like | Easiest to see on | Fixable? |
|---|---|---|---|
| Dead pixel | Small black dot, black on every colour | White (and red, green, blue) | Generally no |
| Stuck pixel | Dot stuck on red, green, blue or another colour | Black, plus colours that don't match it | Sometimes |
| Hot (bright) pixel | Dot that stays white | Black | Rarely |
Test 2: Backlight Bleed vs IPS Glow vs Clouding
These are light problems, not pixel problems. They only show on dark screens.
An LCD makes black by blocking an always-on backlight, and the blocking is never perfect, so some light always leaks past the panel layers, mostly at the clamped edges and corners. That is why almost every LCD shows some glow on a black screen in a dark room, and why the question is never "is there any?" but "is it a defect, and is it bad?" The key is to tell three things apart.
| What you see | What it is | Defect? |
|---|---|---|
| Hazy, silvery or warm sheen toward the corners that shifts and fades when you move your head | IPS glow | Normal panel behaviour |
| Patch of light along an edge or in a corner that stays in the same place however you move | Backlight bleed | Assembly fault; judge severity |
| Irregular lighter blotches across the middle of the screen, best seen on near-black grey | Clouding (mura) | Slight is common; heavy is a fault |
"Every LCD leaks a little light on black. The test is not 'is there any', it's 'would I see it while I work'." — Tech Convenience Store, Tom Mboya Street, Nairobi CBD
Test 3: Burn-In vs Image Retention
Mostly an OLED concern, but retention can occur on LCDs too.
Burn-in is permanent: pixels that have been lit more than their neighbours age unevenly, leaving a ghost of things like a taskbar, menu bar or logo. It is mainly a risk on OLED panels, because every pixel makes its own light and the ones used most wear fastest. Image retention is temporary: after long static use, a faint shadow lingers for minutes or hours and then fades by itself, and it can happen on LCDs. Most "burn-in" on an ordinary IPS laptop is actually temporary retention. Backlight bleed cannot happen on OLED at all, so skip Test 2 for those and spend the time here instead.
Quick Extra Checks While You're Looking
Two minutes more catches the rest of the common faults.
What the Manufacturer Will and Won't Cover
The honest limits of pixel-defect warranties, especially on imported laptops.
Display makers refer to the ISO 9241-307 standard, which classifies panels by how many faulty pixels they may have per million. Most consumer panels are built to Class II, which tolerates a small number of always-on, always-off and faulty sub-pixels, so a brand-new panel can legitimately contain a defect. Policies then vary by brand, model line and country. Published summaries describe thresholds such as roughly three bright or five dark sub-pixel defects on consumer lines, stricter zero-bright-dot treatment on some premium or business lines, and generally more lenient handling for business laptops, but these figures differ between sources and change by model, so treat them as a guide, not a promise.
For a buyer in Kenya the practical point is different. On a refurbished or imported laptop the original manufacturer's warranty is often unavailable or hard to claim locally, so the manufacturer's pixel policy may never help you. Your protection is what the seller will honour in writing, which is why testing before you pay matters so much. Our warranty guide explains what a genuine seller should guarantee.
| What you find | Suggested decision |
|---|---|
| Clean screen, glow shifts with angle | Good. Buy. |
| One tiny stuck or dead pixel at the very edge | Negotiate the price, or choose another unit |
| Any defect near the centre, or a cluster | Walk away |
| Fixed bright patch on dark grey at normal brightness | Walk away |
| Line or column of dead pixels, flicker or colour banding | Walk away |
| Ghost outline of a taskbar or logo that survives colour cycling (OLED) | Walk away. Burn-in is permanent. |
- The seller only shows you the desktop wallpaper — a busy picture hides dead pixels, bleed and burn-in. Insist on solid colours.
- Reluctance to dim the room or to run white and black screens — a seller confident in the panel has no reason to avoid these tests.
- Defects in the centre of the screen described as "normal" — a small edge defect is one thing; a centre defect will annoy you every day.
- An OLED laptop sold with no burn-in check — burn-in is permanent and is often excluded from warranty.
- A screen that looks fine at low brightness only — test at the brightness you will really use, and at high brightness for pixels.
- Screen cleaned with a microfibre cloth
- Night light and auto-brightness switched off
- White, black, red, green, blue run full screen
- Defects counted, coloured and located
- Centre of screen free of defects
- Black screen checked in a dim room
- Head moved side to side to tell glow from bleed
- Near-black grey checked for clouding
- OLED: 50% grey checked for ghost outlines
- White screen checked for tint and uneven brightness
- Scratches and pressure marks checked with screen off
- Touch tested across the whole screen, if a touch model
- KTC, LPScreen, TestYourRig and Laptop Test Online — solid-colour tests, dead vs stuck vs hot pixel behaviour, and fixing stuck pixels
- KTC, MonitorTest, Screentester and DeadPixelCheck — backlight bleed versus IPS glow, dim-room setup, and the head-movement test
- Wikipedia (Screen burn-in; Image persistence; Defective pixel) and ColorScreen and HardwareTest — burn-in versus retention and the 50% grey check
- DeviceBench, ScreenIssues and WhiteScreenPage — ISO 9241-307 classes and manufacturer pixel-defect policies (figures vary by source and model)
- LapSolve — laptop burn-in causes, OLED warranty exclusions and static-content wear
Frequently Asked Questions
Direct answers on testing a laptop screen.
- Clean the screen, raise the brightness, and fill it with full-screen solid colours one at a time: white, black, red, green and blue. Scan slowly from a normal distance and note any dot that does not match the background. A dot that stays black on every colour is a dead pixel, a dot stuck on one bright colour is a stuck pixel, and a dot that stays white is a hot pixel. Check on all five colours, because a defect can vanish on one background.
- A dead pixel receives no power and stays black on every colour, and it is usually permanent. A stuck pixel still has power but one of its red, green or blue parts is locked on, so it shows a fixed bright colour and stands out most against black. Stuck pixels can sometimes recover, while a dead pixel generally cannot be repaired.
- Show a full-screen black image in a dim room at normal brightness and sit at your usual viewing distance, then move your head from side to side. IPS glow is a hazy sheen, usually strongest toward the corners, that shifts and fades as your angle changes. Backlight bleed is a patch of light along an edge or corner that stays in the same place however you move. Mild leakage that only shows on a black screen in a dark room is common on LCD panels.
- Show a 50 percent grey screen and look for faint outlines of things like a taskbar, menu bar or logo. Image retention is temporary and fades after a few minutes or hours of varied content, while burn-in is permanent uneven wear that is still visible after the screen has rested or shown moving content. Burn-in is mainly a concern on OLED panels, and many OLED warranties exclude it.
- Under the ISO 9241-307 standard, most consumer panels are built to a class that tolerates a small number of defective pixels per million, and manufacturer policies vary by brand, model and country. For a buyer, that means a new panel can legitimately have a defect, but you do not have to accept one on a used laptop you are paying for. Look for a perfectly clean centre of the screen and walk away or negotiate if you see defects.
- Tech Convenience Store, Shop U11, F&F Building, Tom Mboya Street, 1st Floor, Nairobi CBD. Mon-Sat 10am-5pm. WhatsApp 0714 722 264. You are welcome to run these screen tests on any unit before you pay, and we can show you each laptop's screen on solid colours in person.
A screen test takes five minutes and uses nothing but solid colours and a dim room. Run all five colours for pixels, a black screen and a head movement for bleed, and a grey screen for burn-in on OLED, and you will have checked almost everything that can quietly go wrong with a display. Any seller confident in a laptop will let you do all of it before you pay.
Want us to run these tests on a specific unit with you? Visit Shop U11, F&F Building, Tom Mboya Street, Nairobi CBD, or WhatsApp 0714 722 264. We deliver countrywide via G4S and Fargo Courier to all 47 counties.
- GradingHow to Verify a Refurbished ThinkPad Is Graded Properly
- WarrantyLaptop Warranty in Kenya: What Should a Genuine Seller Guarantee?
- AuthenticityHow to Check If a Laptop Is Genuine Before Buying
- Full Spec CheckHow to Check Specs in a Laptop (Windows 11)
- Business ChecklistWhat to Look for When Buying a Business Laptop
- Older ThinkPadsIs a 5-Year-Old Lenovo ThinkPad Still Worth Buying?
- EX-UK KeyboardsUS vs UK Keyboard Layout on EX-UK Laptops Explained
- Compare SafelyWhere to Buy Affordable Laptops in Nairobi Safely
See the Screen on Solid Colours Before You Pay
We'll run white, black, red, green and blue on any unit, in a dim corner if you like. 0714 722 264 · Tom Mboya Street.
What our customers say
Real reviews from verified buyers across Kenya — Read all reviews on Google ↗


